MK70F12

Vendor Web: NXP Semiconductors

download svd file

All devices of this Vendor

Name : MK70F12

description : MK70F12 Freescale Microcontroller

Architecture

Architecture : ARM Cortex-M4 (CM4)

revision : r0p1

endian : little

Memory Protection Unit (MPU) : available

Floating Point Unit (FPU) : available

Number of relevant bits in Interrupt priority : 4

Peripherals

name : ADC0
description : Analog-to-Digital Converter
base address : 0x0
Interrupt (57) ADC0

name : ADC1
description : Analog-to-Digital Converter
base address : 0x0
Interrupt (58) ADC1

name : ADC2
description : Analog-to-Digital Converter
base address : 0x0
Interrupt (102) ADC2

name : ADC3
description : Analog-to-Digital Converter
base address : 0x0
Interrupt (103) ADC3

name : AIPS0
description : AIPS-Lite Bridge
base address : 0x0

name : AIPS1
description : AIPS-Lite Bridge
base address : 0x0

name : AXBS
description : Crossbar switch
base address : 0x0

name : CAN0
description : Flex Controller Area Network module
base address : 0x0
Interrupt (29) CAN0_ORed_Message_buffer
Interrupt (30) CAN0_Bus_Off
Interrupt (31) CAN0_Error
Interrupt (32) CAN0_Tx_Warning
Interrupt (33) CAN0_Rx_Warning
Interrupt (34) CAN0_Wake_Up

name : CAN1
description : Flex Controller Area Network module
base address : 0x0
Interrupt (37) CAN1_ORed_Message_buffer
Interrupt (38) CAN1_Bus_Off
Interrupt (39) CAN1_Error
Interrupt (40) CAN1_Tx_Warning
Interrupt (41) CAN1_Rx_Warning
Interrupt (42) CAN1_Wake_Up

name : CAU
description : Memory Mapped Cryptographic Acceleration Unit (MMCAU)
base address : 0x0

name : CMP0
description : High-Speed Comparator (CMP), Voltage Reference (VREF) Digital-to-Analog Converter (DAC), and Analog Mux (ANMUX)
base address : 0x0
Interrupt (59) CMP0

name : CMP1
description : High-Speed Comparator (CMP), Voltage Reference (VREF) Digital-to-Analog Converter (DAC), and Analog Mux (ANMUX)
base address : 0x0
Interrupt (60) CMP1

name : CMP2
description : High-Speed Comparator (CMP), Voltage Reference (VREF) Digital-to-Analog Converter (DAC), and Analog Mux (ANMUX)
base address : 0x0
Interrupt (61) CMP2

name : CMP3
description : High-Speed Comparator (CMP), Voltage Reference (VREF) Digital-to-Analog Converter (DAC), and Analog Mux (ANMUX)
base address : 0x0
Interrupt (98) CMP3

name : CMT
description : Carrier Modulator Transmitter
base address : 0x0
Interrupt (65) CMT

name : CRC
description : Cyclic Redundancy Check
base address : 0x0

name : DAC0
description : 12-Bit Digital-to-Analog Converter
base address : 0x0
Interrupt (81) DAC0

name : DAC1
description : 12-Bit Digital-to-Analog Converter
base address : 0x0
Interrupt (82) DAC1

name : DDR
description : DRAM Controller
base address : 0x0
Interrupt (93) DDR

name : DMA
description : Enhanced direct memory access controller
base address : 0x0
Interrupt (0) DMA0_DMA16
Interrupt (1) DMA1_DMA17
Interrupt (2) DMA2_DMA18
Interrupt (3) DMA3_DMA19
Interrupt (4) DMA4_DMA20
Interrupt (5) DMA5_DMA21
Interrupt (6) DMA6_DMA22
Interrupt (7) DMA7_DMA23
Interrupt (8) DMA8_DMA24
Interrupt (9) DMA9_DMA25
Interrupt (10) DMA10_DMA26
Interrupt (11) DMA11_DMA27
Interrupt (12) DMA12_DMA28
Interrupt (13) DMA13_DMA29
Interrupt (14) DMA14_DMA30
Interrupt (15) DMA15_DMA31
Interrupt (16) DMA_Error

name : DMAMUX0
description : DMA channel multiplexor
base address : 0x0

name : DMAMUX1
description : DMA channel multiplexor
base address : 0x0

name : DRY
description : Tamper Detect and Secure Key Storage
base address : 0x0

name : ENET
description : Ethernet MAC-NET Core
base address : 0x0
Interrupt (75) ENET_1588_Timer
Interrupt (76) ENET_Transmit
Interrupt (77) ENET_Receive
Interrupt (78) ENET_Error

name : EWM
description : External Watchdog Monitor
base address : 0x0
Interrupt (22) Watchdog

name : FB
description : FlexBus external bus interface
base address : 0x0

name : FMC
description : Flash Memory Controller
base address : 0x0

name : FTFE
description : Flash Memory Interface
base address : 0x0
Interrupt (18) FTFE

name : FTM0
description : FlexTimer Module
base address : 0x0
Interrupt (62) FTM0

name : FTM1
description : FlexTimer Module
base address : 0x0
Interrupt (63) FTM1

name : FTM2
description : FlexTimer Module
base address : 0x0
Interrupt (64) FTM2

name : FTM3
description : FlexTimer Module
base address : 0x0
Interrupt (101) FTM3

name : I2C0
description : Inter-Integrated Circuit
base address : 0x0
Interrupt (24) I2C0

name : I2C1
description : Inter-Integrated Circuit
base address : 0x0
Interrupt (25) I2C1

name : I2S0
description : Inter-IC Sound / Synchronous Audio Interface
base address : 0x0
Interrupt (35) I2S0_Tx
Interrupt (36) I2S0_Rx

name : I2S1
description : Inter-IC Sound / Synchronous Audio Interface
base address : 0x0
Interrupt (104) I2S1_Tx
Interrupt (105) I2S1_Rx

name : LCDC
description : Liquid Crystal Display Controller
base address : 0x0
Interrupt (97) LCD

name : LLWU
description : Low leakage wakeup unit
base address : 0x0
Interrupt (21) LLW

name : LMEM
description : Local Memory Controller
base address : 0x0

name : LPTMR0
description : Low Power Timer
base address : 0x0
Interrupt (85) LPTimer

name : MCG
description : Multipurpose Clock Generator module
base address : 0x0
Interrupt (84) MCG

name : MCM
description : Core Platform Miscellaneous Control Module
base address : 0x0
Interrupt (17) MCM

name : MPU
description : Memory protection unit
base address : 0x0

name : NFC
description : NAND flash controller
base address : 0x0
Interrupt (95) NFC

name : OSC0
description : Oscillator
base address : 0x0

name : OSC1
description : Oscillator
base address : 0x0

name : PDB0
description : Programmable Delay Block
base address : 0x0
Interrupt (72) PDB0

name : PIT
description : Periodic Interrupt Timer
base address : 0x0
Interrupt (68) PIT0
Interrupt (69) PIT1
Interrupt (70) PIT2
Interrupt (71) PIT3

name : PMC
description : Power Management Controller
base address : 0x0
Interrupt (20) LVD_LVW

name : PORTA
description : Pin Control and Interrupts
base address : 0x0
Interrupt (87) PORTA

name : PORTB
description : Pin Control and Interrupts
base address : 0x0
Interrupt (88) PORTB

name : PORTC
description : Pin Control and Interrupts
base address : 0x0
Interrupt (89) PORTC

name : PORTD
description : Pin Control and Interrupts
base address : 0x0
Interrupt (90) PORTD

name : PORTE
description : Pin Control and Interrupts
base address : 0x0
Interrupt (91) PORTE

name : PORTF
description : Pin Control and Interrupts
base address : 0x0
Interrupt (92) PORTF

name : PTA
description : General Purpose Input/Output
base address : 0x0

name : PTB
description : General Purpose Input/Output
base address : 0x0

name : PTC
description : General Purpose Input/Output
base address : 0x0

name : PTD
description : General Purpose Input/Output
base address : 0x0

name : PTE
description : General Purpose Input/Output
base address : 0x0

name : PTF
description : General Purpose Input/Output
base address : 0x0

name : RCM
description : Reset Control Module
base address : 0x0

name : RFSYS
description : System register file
base address : 0x0

name : RFVBAT
description : VBAT register file
base address : 0x0

name : RNG
description : Random Number Generator Accelerator
base address : 0x0
Interrupt (23) RNG

name : RTC
description : Secure Real Time Clock
base address : 0x0
Interrupt (66) RTC
Interrupt (67) RTC_Seconds

name : SDHC
description : Secured Digital Host Controller
base address : 0x0
Interrupt (80) SDHC

name : SIM
description : System Integration Module
base address : 0x0

name : SMC
description : System Mode Controller
base address : 0x0

name : SPI0
description : Deserial Serial Peripheral Interface
base address : 0x0
Interrupt (26) SPI0

name : SPI1
description : Deserial Serial Peripheral Interface
base address : 0x0
Interrupt (27) SPI1

name : SPI2
description : Deserial Serial Peripheral Interface
base address : 0x0
Interrupt (28) SPI2

name : TSI0
description : Touch Sensing Input
base address : 0x0
Interrupt (83) TSI0

name : UART0
description : Serial Communication Interface
base address : 0x0
Interrupt (44) UART0_LON
Interrupt (45) UART0_RX_TX
Interrupt (46) UART0_ERR

name : UART1
description : Serial Communication Interface
base address : 0x0
Interrupt (47) UART1_RX_TX
Interrupt (48) UART1_ERR

name : UART2
description : Serial Communication Interface
base address : 0x0
Interrupt (49) UART2_RX_TX
Interrupt (50) UART2_ERR

name : UART3
description : Serial Communication Interface
base address : 0x0
Interrupt (51) UART3_RX_TX
Interrupt (52) UART3_ERR

name : UART4
description : Serial Communication Interface
base address : 0x0
Interrupt (53) UART4_RX_TX
Interrupt (54) UART4_ERR

name : UART5
description : Serial Communication Interface
base address : 0x0
Interrupt (55) UART5_RX_TX
Interrupt (56) UART5_ERR

name : USB0
description : Universal Serial Bus, OTG Capable Controller
base address : 0x0
Interrupt (73) USB0

name : USBDCD
description : USB Device Charger Detection module
base address : 0x0
Interrupt (74) USBDCD

name : USBHS
description : USB HS/FS/LS OTG Controller
base address : 0x0
Interrupt (96) USBHS

name : VREF
description : Voltage Reference
base address : 0x0

name : WDOG
description : Generation 2008 Watchdog Timer
base address : 0x0
Interrupt (22) Watchdog


Is something missing? Is something wrong? can you help correct it ? Please contact us at info@chipselect.org !

This website is sponsored by EmbeetleEmbeetle, an IDE designed from scratch for embedded software developers.